Moxa IOLOGIK E2212 Manual de usuario descargar pdf (Pagina 62)

Click&Go User’s Manual Click&Go V2 Developing Process

3-42

NOTE

In the first address column, IP address or URL can be used to specify the target. Only the DNS

and Gateway settings of the ioLogik need to be specified.

Refer to the target IP video devices’ user manual for detail CGI command formats.

Peer-to-Peer Function

Peer-to-peer I/O is one of the Click&Go configurations besides the IF-THEN-ELSE logic. It can be

used to set up I/O mapping over Ethernet from an input channel on one ioLogik to an output channel

on another ioLogik. By using a pair of ioLogik products, the input status could be the trigger of a

remote output. For example, if a push button is connected to DI channel 0 of ioLogik#1 and the

Click&Go peer-to-peer I/O function is activated, the remote ioLogik#2 can turn its DO output

channel on or off depending on the status of the remote ioLogik#1. Peer-to-peer I/O makes it easy to

set up applications such as controlling a push button and lights located in different rooms, buildings,

or even cities.

The ioLogik supports peer-to-peer I/O for simple one-to-one mapping as well as one-to-many and

many-to-many mapping. A single input channel can trigger up to five remote output channels.

IP or URL are allowed

Customized Commands

Column

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 105 106

Sin comentarios

Moxa IOLOGIK E2212 Manual de usuario Pagina 62