Moxa IOLOGIK E2212 Manual de usuario descargar pdf (Pagina 61)

Click&Go User’s Manual Click&Go V2 Developing Process

3-41

After entering the subject of an e-mail, enter the message in the Mail Content area. Dynamic fields

such as time, date, IP address, and I/O status can be inserted in your message by clicking Keyword

Lookup.

NOTE

Content in the same logic entry can be sent by either Active Message or e-mail, in which case the

content of the messages will be the same. If you would like to send an Active Message and

e-mail based on the same event but with different content, you will need to use two separate

logic entries, one for the Active Message and one for the e-mail.

SMTP server information including username/password, and the recipient database can be

configured or by clicking the Set Mail Address button (

). Clicking the finger icon ( )

can move the selected address from the Recipient Database to the Recipient List.

To manually add e-mail addresses to the Recipient Database, enter the Name and Mail Address and

click Add. Once the address has been added to the Recipient Database, use the finger icons to

move it to or from the Recipient List.

CGI Command

Not only do the ioLogik products support CGI commands, they also allow the Click&Go logic to

interact with proper IF conditions and send out CGI commands to IP Video devices such as the

Moxa V351 video server or VPort 25 IP camera. Support for user-defined CGI commands in the

Click&Go THEN/ELSE action turns the ioLogik product into the expansion I/O controller of these

video devices. For example, setting a trigger to focus and take a snapshot when there is an

intrusion. Select the THEN/ELSE actions for the CGI command and click on the property button

(

) to enter the CGI Command Settings window.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 105 106

Sin comentarios

Moxa IOLOGIK E2212 Manual de usuario Pagina 61