Moxa VPORT 254-M-SC-T Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 98
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
VPort 254 User’s Manual Introduction
1-7
Product Description
BNC video input/output
The BNC video input is a 1Vpp, 75-ohm video port for connecting an external camera. To ensure
that the correct video modulation type is detected, cameras should be connected and powered on
before the VPort is powered on.
NOTE
Please use the standard CCTV cable (RG59U or above) to connect the video camera and VPort’s
BNC connector.
RCA phone jacks for audio input/output
The VPort 254 has 2 RCA phone jacks for audio input and output on the front panel. One jack is
for a MIC-in/Line-in audio input connection, which can be directly connected with a microphone
or an audio source from an amplifier. The other jack is a Line-out audio output connection, which
can be used to connect earphones or an amplifier.
LED indicators
The front panel of the VPort 254 contains several LED indicators. The function of each LED is
described in the table below.
LED Color State Description
ON Hardware initialization
RED
FLASHING Software initialization
ON System boot-up
STAT
GREEN
FLASHING Firmware upgrade proceeding
On Power is being supplied to power input PWR1
PWR1
AMBER
Off Power is not being supplied to power input PWR1
On Power is being supplied to power input PWR2
PWR2
AMBER
Off Power is not being supplied to power input PWR2
On
Three conditions could cause the LED to light up:
1. One of the 2 power inputs is disconnected.
2. Video loss
3. Network disconnected
Settings can be modified on the System Configuration
Æ
Alarm ÆSystem Alarm page.
FAULT
RED
Off
Both power inputs are connected and working, or there
is no video loss, or the network disconnected alarm is
silent (if it is activated).
On Video signal has been detected
V1 V2
V3 V4
GREEN
Off Video signal has not been detected
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 97 98

Comentarios a estos manuales

Sin comentarios