Moxa VPORT 254-M-SC-T Manual de usuario Pagina 78

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 98
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 77
VPort 254 User’s Manual System Configuration
4-34
In Transparent PTZ Control mode, the serial data from the legacy PTZ control panel or
joystick will be transformed into IP packets for transmission over a TCP/IP network, and
once the VPort video encoder receives these IP packets, the PTZ control commands will be
transformed back to serial data format for controlling the PTZ camera’s action. You do not
need to install a PTZ driver to control the PTZ camera’s action, which means that a large
variety of different PTZ cameras can be used with the VPort video encoders and their
supported PTZ control panel or joystick.
NOTE
The legacy PTZ control panel or joystick should be connected to the VPort’s PTZ port or the
COM port of a PC. But, when it is connected to a PC’s COM port, you will need to install a real
COM driver on the PC and map the COM ports. For detailed information, refer to the VPort
SDK PLUS-ActiveX Control SDK for the Real COM driver and COM port mapping function
sample codes. You can download this SDK from Moxa’s website (www.moxa.com
).
y Specific PTZ Driver:
Usually, a PTZ driver is required to control a PTZ camera over a TCP/IP network. This is
because each PTZ camera supplier has their own proprietary PTZ control protocol. VPort
video encoders support all popular PTZ drivers for controlling PTZ cameras.
Setting Description Default
Control Mode
Select the PTZ control mode in
Transparent PTZ Control or PTZ
Driver
PTZ driver
Vista de pagina 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 97 98

Comentarios a estos manuales

Sin comentarios