Moxa VPORT 254-M-SC-T Manual de usuario descargar pdf (Pagina 84)

VPort 254 User’s Manual System Configuration

4-40

TCP Client Mode (only available in Serial Device Control and TCP Client Mode)

Setting Description Default

Destination IP address

Allows the VPort to connect actively to

the remote host whose address is set by

this parameter.

blank

Designated Local port

TCP port number for the connection. It

can also be enabled or disabled.

disable

TCP Connect On

Startup: A TCP connection will be

established on startup, and will remain

active indefinitely.

Any Character: A TCP connection will

be established when any character is

received from the serial interface, and

will remain active indefinitely.

Startup

NOTE

To avoid influencing the video performance, it is strongly recommended that the VPort’s COM

port should be used for simple serial control and data transmission, such as a card reader.

Parameters

Some COM port parameters need to be configured.

Port Settings

Setting Description Default

Baud rate (bps)

The baud rate specified by the PTZ

camera’s serial communication specs.

2400

Data bits 8

Stop bits 1

Parity bits

The parameters used to define the serial

communication.

None

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 97 98

Sin comentarios

Moxa VPORT 254-M-SC-T Manual de usuario Pagina 84