Moxa VPORT 254-M-SC-T Manual de usuario Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 98
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
VPort 254 User’s Manual Introduction
1-4
Package Checklist
The Moxa VPort 254 is shipped with the following items. If any of these items are missing or
damaged, please contact your customer service representative for assistance.
y VPort 254
y 10-pin terminal block for 1 power input and 4 digital inputs
y 8-pin terminal block for the other power input and 2 relay outputs
y 5-pin terminal block for RS-232/422/485 PTZ control port
y Quick Installation Guide
y Document & Software CD (includes User’s Manual, Quick Installation Guide, Moxa IVN
Solution Datasheet, and Utility)
y Warranty statement
NOTE: Notify your sales representative if any of the above items is missing or damaged.
Product Features
High Performance Video/Audio Networking Solution
y Works with NTSC/PAL analog video cameras
y Supports MPEG4/MJPEG video compression technologies
y 4 BNC video inputs
y Video stream up to 120 frames/sec in CIF (352 x 240) resolution through a total of 4 channels
y Selection from full D1, 4CIF, VGA, CIF, and QVGA resolutions
y 1 audio input and 1 audio output for 2-way voice communication
y TCP, UDP, and HTTP network transmission modes
y Supports Modbus/TCP for easy communication with SCADA systems
y Standard RTSP (Real-time streaming protocol) for easy integration
y Supports multicast (IGMP) protocols for efficient network transmission; DDNS, UPnP and IP
filtering supported
y Supports QoS (TOS) for priority transmission
y Supports SNMP V1/V2c/V3 for network management
y Built-in web server and RS-232 console for remote access and configuration
y One auto-sensing 10/100BaseT(X) Ethernet port or 100BaseFX (SC connector)
y Can handle up to 8 simultaneous video streams of output
y Set video quality to CBR (constant bit rate) or VBR (variable bit rate)
y Supports 1 RS-232/422/485 DB9 COM port for controlling a PTZ (PAN/TILT/ZOOM)
motorized camera or serial device via a TCP/IP network
y Supports 1 RS-232/RS-422/RS-485 5-pin PTZ port for controlling a PTZ (PAN/TILT/ZOOM)
motorized camera via a TCP/IP network
y UPnP and IP filtering supported
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 97 98

Comentarios a estos manuales

Sin comentarios