Moxa NPORT 5110-T Manual de usuario descargar pdf (Pagina 9)

NPort 5100 Series Getting Started

2-2

Panel Layout of NPort 5100 Series

NOTE: The layouts of NPort 5130 and NPort 5150 are the same as for NPort 5110.

Connecting the Hardware

This section describes how to connect the NPort 5100 to serial devices for first time testing purposes. We cover

Connecting to the Network, Connecting to a Serial Device, and LED Indicators.

Connecting the Power

Connect the 12 to 48 VDC power cord with NPort 5100’s power input. If the power is properly supplied, the

“Ready” LED will show a solid red color until the system is ready, at which time the “Ready” LED will change to

a green color.

Connecting to the Network

Connect one end of the Ethernet cable to NPort 5100’s 10/100M Ethernet port and the other end of the cable

to the Ethernet network. NPort 5100 will indicate a valid connection to the Ethernet in the following ways:

• The Ethernet LED maintains a solid green color when connected to a 100 Mbps Ethernet network.

• The Ethernet LED maintains a solid orange color when connected to a 10 Mbps Ethernet network.

• The Ethernet LED will flash when Ethernet packets are being transmitted or received.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 93 94

Sin comentarios

Moxa NPORT 5110-T Manual de usuario Pagina 9