Moxa AWK-1100 Manual de usuario descargar pdf (Pagina 26)

AirWorks AWK-1100 User’s Manual Web Console Configuration

For specific needs such as configuring the AWK-1100 as a wireless LAN-to-LAN bridge, the AP

functionality can be disabled so that no wireless client can associate with the AP.

The RF type of the WLAN interface can be configured to work with IEEE 802.11b only (B Only),

IEEE 802.11g only (G Only), B WIFI mode (for internal usage), or mixed mode (Mixed—802.11g

and 802.11b simultaneously).

The number of available RF channels depends on local regulations; therefore, you must choose an

appropriate regulatory domain to comply with local regulations. The SSID of a wireless client

computer and the SSID of the AP must be identical for them to communicate with each other.

If you experience RF interference, you may want to reduce the Data rate to ensure a more reliable

wireless transmission. In most cases, leave the setting to Auto.

The transmit power of the RF module of the AWK-1100 can be adjusted so that the RF coverage

of the AWK-1100 can be changed.

Link Integrity

When the Ethernet LAN interface has been detected to be disconnected from the wired network,

all currently associated wireless clients are disassociated by the AP and no wireless client can

associate with the AP. The detection mechanism is based on pinging the IP address specified in the

Reference host.

Association Control

If the number of currently associated wireless clients exceeds the value specified in the Max

number of clients setting, no more wireless clients can associate with the AWK-1100. If the

traffic load of the AWK-1100 exceeds the load specified in the Block clients if traffic load

exceeds setting, no more wireless clients can associate with the AWK-1100.

AP Load Balancing

Several APs can form a load-balancing group if they are set with the same Group ID. The

load-balancing policy can be by Number of Users or by Traffic Load.

If the by-number-of-users policy is selected, a new wireless user can only associate with an AP

that has the smallest number of associated wireless users in the group. On the other hand, if the

by-traffic-load policy is selected, a new wireless user can only associate with an AP that has the

least traffic load in the group.

3-13

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Sin comentarios

Moxa AWK-1100 Manual de usuario Pagina 26