Moxa DA-681-I-DP-CE Manual de usuario descargar pdf (Pagina 27)

DA-681 Series Hardware User’s Manual Hardware Installation

Use the Y-type cable to convert the mini-DIN connector into two 6-pin mini-DIN connectors to

connect both a PS/2 keyboard and PS/2 mouse at the same time. (The Y-type cable is not included

in the accessory package. It should be purchased separately. You may also use the USB ports to

connect your USB-based keyboard and mouse.)

ATTENTION

Please note that without the Y-type cable, the PS/2 connector on the DA-681 can only work with

a PS/2 keyboard. A PS/2 mouse will not function when directly connected to the PS/2 connector

on the DA-681 embedded computer.

Connecting USB Devices

The DA-681 embedded computer has two USB 2.0 ports on the rear panel. All of the ports are

UHCI, Rev 2.0 compliant and support Plug & Play and hot swapping. These ports can be used to

connect USB devices, such as a keyboard, mouse, USB flash disk, and USB CD-ROM. In addition,

both USB ports support system boot up, which can be activated by modifying the BIOS settings.

The chapter “BIOS Setup” describes the configuration process in detail.

USB 2.0

Host x 2

LAN Ports

The DA-681 has 6 10/100 Mbps LAN ports. When the cable is properly connected, the LEDs on

the RJ45 connectors will glow to indicate a proper connection.

10/100 Mbps Ethernet x 6

2-14

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 56 57

Sin comentarios

Moxa DA-681-I-DP-CE Manual de usuario Pagina 27