Moxa INJ-24 Guía de instalación descargar pdf (Pagina 6)

- 6 -

DIN-Rail Mounting

The plastic DIN-Rail attachment plate should already be fixed to the back

panel of INJ-24 when you take it out of the box. If you need to reattach

the DIN-Rail attachment plate, make sure the stiff metal spring is situated

towards the top, as shown in the figures below.

STEP 1:

Insert the top of the DIN-Rail into

the slot.

STEP 2:

The DIN-Rail attachment unit will

snap into place as shown below.

To remove the INJ-24 from the

DIN-Rail, insert a flat-blade screw

driver horizontally into the DIN-Rail

kit under the INJ-

24, and then pull it

upwards and release INJ-

24 towards

you away from the DIN-Rail.

Grounding the INJ-24

Grounding and wire routing help limit the

effects of noise due to electromagnetic

interference (EMI). Run the right most contact

of the 3-

contact terminal block to the grounding

surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well-grounded

mounting surface, such as a metal panel.

1 2 3 4 5 6 7 8

Sin comentarios

Moxa INJ-24 Guía de instalación Pagina 6