Moxa INJ-24 Guía de instalación descargar pdf (Pagina 3)

- 3 -

You should also pay attention to the following items:

• Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

• NOTE: Do not run signal or communications wiring and power wiring

in the same wire conduit. To avoid interference, wires with different

signal characteristics should be routed separately.

• You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring that shares similar electrical characteristics can be

bundled together.

• Keep input wiring and output wiring separated.

• It is strongly advised that you label wiring to all devices in the system

when necessary.

Package Checklist

The Moxa INJ-24 Series is shipped with the following items. If any of

these items is missing or damaged, contact a Moxa customer service

representative for assistance.

• Moxa PoE Injector INJ-24

• Hardware Installation Guide

• Moxa Product Warranty Statement

Features

High Performance Network Switching Technology

• 10/100/1000BaseT(X)

• Provides up to 30 watts per PoE port

• Active circuit protection

• Auto disconnection for over voltage or under voltage

• Power consumption detection and classification

• Industrial-grade reliability

Rugged Design

• Operating temperature range from 0 to 60°C, or extended operating

temperature from -40 to 75°C for “T” models

• IP30, rugged high-strength case

• DIN-Rail or panel mounting ability

1 2 3 4 5 6 7 8

Sin comentarios

Moxa INJ-24 Guía de instalación Pagina 3