Moxa IOLOGIK E2260 Manual de usuario descargar pdf (Pagina 23)

ioLogik E2260 User’s Manual Utilities

3-6

When importing a server list, you will be prompted to select which servers on the list need to be

imported.

The file will have a .SLT extension and can be opened as a text file. The server list will provide

the following information for each server:

1. Server Name

2. Module Type

3. IP Address

4. Unit ID

System

Several operations are possible from the System menu.

Auto Scan Active Ethernet I/O Server will search for ioLogik servers on the network. When

connecting for the first time or recovering from a network disconnection, you can use this

command to find I/O servers that are on the network.

Network Interface allows you to select a network to use, if the PC has multiple network adapters

installed.

I/O Status Refresh Rate is used to adjust how often the I/O server is polled for device status. The

current rate is displayed on the status bar at the bottom of the window. Note that higher sync rates

result in higher loads on the network.

TCP Socket Timeout Interval allows you to select the preferred timeout value for TCP socket

communication.

COM Port Setting is used to set the parameters for Modbus communciation, such as baudrate,

data bits, and timeout interval. For most applications, this will involve connecting to ioLogik

R-Series devices.

Active Message Listen Port specifies the port number to use for Active Ethernet I/O messages. If

your network uses a firewall, you can coordinate this setting with your firewall settings to ensure

that active messages get through.

Reset NA4010 Network Adapter IP is used to re-assign an IP address to the NA-4010 network

adapter, for ioLogik 4000 systems.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 88 89

Sin comentarios

Moxa IOLOGIK E2260 Manual de usuario Pagina 23