Moxa ONCELL G2110-T Manual de usuario descargar pdf (Pagina 76)

OnCell G2100 Series User’s Manual GSM/CSD Connection

5-4

Answering a CSD Connection

PComm Terminal Emulator can be used to answer a CSD call manually:

1. When the terminal displays "RING", type ATA and press Enter.

2. Check the GSM indicator on the front panel. If the LED is on and an amber color, the CSD

connection has been established successfully. The modem will automatically switch to data

mode. At this point, you can proceed with data communication.

PComm Terminal Emulator can be used to configure the modem to answer CSD calls

automatically:

1. In the terminal window, type ATS0=x and press Enter. For x, substitute the number of rings

that the modem should receive before answering the call. For example, to answer after the first

ring, type ATS0=1.

2. Type AT&W and press Enter.

To disconnect the modem, type +++. The modem will respond with OK, which means that you

have already switched back to command mode. Type ATH and press Enter to disconnect.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 104 105

Sin comentarios

Moxa ONCELL G2110-T Manual de usuario Pagina 76