Moxa IMC-101-M-SC-T Guía de instalación descargar pdf (Pagina 5)

- 5 -

DIN-Rail Mounting

The aluminum DIN-Rail attachment plate should be fixed to the back panel of

IMC when you take it out of the box. If you need to reattach the DIN-Rail

attachment plate to IMC, make sure the stiff metal spring is situated towards

the top, as shown in the figures below

STEP 1:

Insert the top of the DIN-Rail into the

slot just below the stiff metal spring.

STEP 2:

The DIN-Rail attachment unit will

snap into place as shown below.

metal

spring

DIN-Rail

metal

spring

DIN-Rail

To remove Moxa Industrial Media Converter from the DIN-Rail, simply

reverse Steps 1 and 2 above.

Wall Mounting (Optional)

For some applications, you will find it convenient to mount Moxa Industrial

Media Converter on the wall, as illustrated below.

STEP 1:

Remove the aluminum DIN-Rail attachment plate from Moxa Industrial Media

Converter, and then attach the wall mount plates, as shown in the diagrams

below.



Top

plate

Bottom

plate

1 2 3 4 5 6 7 8 9 10 ... 15 16

Sin comentarios

Moxa IMC-101-M-SC-T Guía de instalación Pagina 5