Moxa IMC-101G Guía de instalación descargar pdf (Pagina 12)

- 12 -

LED Indicators

The front panel of the IMC-101G has several LED indicators. The function of

each LED is described in the table below.

LED Color State Description

Power is being supplied to power input

PWR1

PWR1 AMBER

Off

Power is not being supplied to power

input PWR1

Power is being supplied to power input

PWR2

PWR2 AMBER

Off

Power is not being supplied to power

input PWR2

When the corresponding PORT alarm

is enabled, and the port’s link is

inactive.

FAULT RED

Off

When the corresponding PORT alarm

is enabled and the port’s link is active,

or when the corresponding PORT

alarm is disabled.

On SFP port’s 1000 Mbps link is active.

Blinking

Data is being transmitted at 1000

Mbps.

G2 GREEN

Off SFP port’s 1000 Mbps link is inactive.

On TP port’s 1000 Mbps link is active

Blinking Data is being transmitted at 1000 Mbps

G1 GREEN

Off TP port’s 1000 Mbps link is inactive

On TP port’s 10 Mbps link is active

Blinking Data is being transmitted at 10 Mbps

10M GREEN

Off TP port’s 10 Mbps link is inactive

On TP port’s 100 Mbps link is active

Blinking Data is being transmitted at 100 Mbps

100M GREEN

Off TP port’s 100 Mbps link is inactive

Auto MDI/MDI-X Connection

The Auto MDI/MDI-X function allows users to connect the IMC101G’s

10/100/1000BaseT(X) ports to any kind of Ethernet device, without paying

attention to the type of Ethernet cable being used for the connection. This

means that you can use either a straight-through cable or cross-over cable to

connect the IMC-101G to Ethernet devices.

1 2 ... 7 8 9 10 11 12 13 14 15

Comentarios a estos manuales

Sin comentarios

Moxa IMC-101G Guía de instalación Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Convertidores de medios de la red Moxa IMC-101G